our raised garden bed construction is reinforcing the sleepers. This seems especially useful in the sandy soil, given the plot is on a slope. Simon used large galvanised coach screws to keep the sleepers in place and set the reinforcing stakes at the joins of each sleepers to minimise any movement and water run-off (we hope).
With the sleepers now in place we are ready to constructt the layers of our no-dig garden. First off, however, we will do some minor pulling out of grass (that you can see by the fence/retaining wall) just to minimise regrowth, as the bed is not as deep as we had first envisaged. We should get approx 30-40 cm depth with the no-dig layers, probably higher at first until the layers settle over time.
Next: no-dig layers! :o)